How To Restore Data From A Backup - Siemens PCS 7 Service Manual

Starting with the Import/Export Assistant (IEA)
● Start the export assistant from BatchCC by selecting the Options > Export menu command.
● Start the import assistant from BatchCC by selecting the Options > Import menu command.
Additional information
●
3.2.4.3

How to restore data from a backup

Introduction
You can restore the data from a backup file and update the Batch process cell in the SIMATIC
BATCH Control Center (BatchCC).
Requirement
No Batch process cell is available in the BatchCC.
Reading a backup
1. In BatchCC, select the menu command Options > Restore.
2. Select the storage location for the backup file ("...".sbb).
3. Click "Open".
Updating the Batch process cell
1. Select the Batch process cell in the tree view of BatchCC.
2. Select the menu command Edit > Update Process Cell.
3. Click "OK".
4. Compare the columns "Current process cell" und "New process cell" line-by-line. Rearrange
5. Click "OK".
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
SIMATIC BATCH Manual
The "Restore" dialog box opens.
The backup file is loaded.
The "Batch Process Cell - ..." dialog box opens.
The "Update Process Cell" dialog box opens.
them if necessary.
You can find additional information about this in the manual
7; SIMATIC BATCH .
The "Updating Process Cell" dialog box opens and closes automatically when the update
is completed.
Ensuring Availability
3.2 Data backup
Process Control System PCS
27