Diagnostics For The Batch Stations - Siemens PCS 7 Service Manual

Diagnostics for
Operating capability of redundant OS
components
Time master role of the redundant OS
server
General system information of an OS
server
OS fault - preparing diagnostics
Status PCS 7 Web Server
7.14

Diagnostics for the BATCH Stations

Overview
Diagnostics for
Operating capability of all BATCH
components and communication
connections
Status of the BATCH server
Status of master
Status of the standby server (partner
server)
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
Diagnostics tool
Redundancy status display
(Page 106)
Time master role of the OS
server (status) (Page 106)
WinCC "System Info" channel
(Page 102)
Only to support experts
Diagnostics tool
Maintenance station (Page 75) The maintenance station is an operator station
Status icons in the BATCH
server taskbar (Page 107)
Status icons in the BATCH
server taskbar (Page 107)
Status icons in the BATCH
server taskbar (Page 107)
7.14 Diagnostics for the BATCH Stations
Called with
Picture must be configured and downloaded to
the OS.
You can find information about this in the
Process Control System
configuration manual
PCS 7; Operator Station
The tags "@TimeSyncDevice1State" and
"@TimeSyncDevice2State" need to be
configured on a faceplate. The OS must be
loaded.
Picture must be configured and downloaded to
the OS.
You can find information about this in the
Process Control System
configuration manual
PCS 7; Operator Station
You can find information on this in the section
"OS fault - preparing diagnostics (Page 68)".
Internet Explorer: http://
<server_address>.status.html
Called with
that is specially configured for use in diagnostics.
The maintenance station has to be configured.
Additional information is available in the
Process Control System PCS 7;
documentation
Maintenance Station
Taskbar
Taskbar
Taskbar
Diagnostics in PCS 7
85