Download  Print this page

Diagnostics For Profibus Dp; Diagnostics On Profinet - Siemens PCS 7 Service Manual

Hide thumbs

Advertisement

Diagnostics in PCS 7

7.10 Diagnostics on PROFINET

7.9

Diagnostics for PROFIBUS DP

Overview
Diagnostics for
Devices and connections with
diagnostic capability
Internal PROFIBUS DP interface of the
CPU
PROFIBUS DP error
Status of PROFIBUS nodes
Status of stations
Station failure
Fault indication with detailed information
about cause of error
Name and comment from HW Config
Order number, addresses, slot types
Error on PROFIBUS
7.10
Diagnostics on PROFINET
Overview
Diagnostics for
Devices and connections with
diagnostic capability
Internal PROFINET interface of the CPU
(only for CPU 41x- PNIO
82
Diagnostics tool
Maintenance station (Page 75) The maintenance station is an operator station
Module Information (Page 112) Diagnostics via HW Config > Module Information
PROFIBUS DP Diagnostics
With Diagnostic Repeater
(Page 113)
NetPro (Page 97)
NCM S7 (Page 99)
SYSTEM Process Control
Diagnostics (add-on product)
(Page 119)
Amprolyzer (add-on product)
(Page 116)
Diagnostics tool
Maintenance Station (Page 75) The Maintenance Station is an operator station
Module information (Page 112) Diagnostics via HW Config > Module Information
Called via
that is specially configured for use in diagnostics.
The maintenance station has to be configured.
Additional information is available in the
Process Control System PCS 7;
documentation
Maintenance Station
Diagnostics via HW Config > Module Information
In the Siemens SIMATIC programs Start menu:
STEP 7 > NetPro
Select the menu command View > With DP
Slaves to display the DP slaves in the network
view
In the Siemens SIMATIC programs Start menu:
STEP 7 > NCM S7 > Diagnostics
Picture must be configured and downloaded to
the OS.
Additional information is available in the
Process Control System
configuration manual
PCS 7; Operator Station
Available if the Amprolyzer is installed.
Called via
that is specially configured for use in diagnostics.
The Maintenance Station has to be configured.
Additional information is available in the
Process Control System PCS 7;
documentation
Maintenance Station
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02

Advertisement

   Also See for Siemens PCS 7

   Related Manuals for Siemens PCS 7

Comments to this Manuals

Symbols: 0
Latest comments: