Interactive Operator Control And Monitoring With The Os Web Option - Siemens PCS 7 Service Manual

Failure - What next?
6.2 Preparing for expert support
6.2.7

Interactive operator control and monitoring with the OS Web Option

Interactive operator control and monitoring of a PCS 7 plant using the OS Web Option
Use the OS Web Option for interactive control and monitoring of a PCS 7 plant.
For additional information, refer to the
The figure below shows how the OS Web Option (OS Web server, Web client) can be used in
a PCS 7 plant.
Transmission paths
The data can be transmitted along the following routes:
● Telephone line (modem)
● TCP/IP connection (system-internal network connection)
● Internet
70
Process Control System PCS 7; OS Web Option manual.
Service Manual, 03/2012, A5E02779775-02
Service support and diagnostics (V8.0)