Diagnostics With The Maintenance Station (Asset Management) - Siemens PCS 7 Service Manual

Hide thumbs Also See for PCS 7:
Table of Contents

Advertisement

7.2

Diagnostics with the maintenance station (asset management)

Introduction
With PCS 7 V6.1 and higher, a PCS 7 system can be fully diagnosed with the help of the
maintenance station. The maintenance station is an operator station that is specially configured
and assigned parameters for use in diagnostic and maintenance functions.
We particularly recommend the use of a maintenance station in medium and large PCS 7
systems.
Maintenance station
With the maintenance station, PCS 7 enables you to call up information on the states of all
PCS 7 components on diagnostics screens which are hierarchically structured. As part of this
process, the data of a component are analyzed using the available online functions of the
associated tools. You can access ES data from the diagnostics screens (can be controlled via
access protection mechanisms).
Screens for process-control diagnostics can be generated automatically for the entire PCS 7
system and made available on the maintenance station. The top level forms an overview
screen for the entire system.
Diagnostics options
You will find information on the states of individual PCS 7 components with diagnostic capability
on the maintenance station's special diagnostics screens.
Area
Automation systems
PC stations
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
7.2 Diagnostics with the maintenance station (asset management)
Diagnostics for ...
● CPU
● SIMATIC PCS 7 BOX
● Distributed I/O, such as ET 200M, ET 200S,
ET 200iSP, ET 200pro, input and output modules
● Field devices (HART, PROFIBUS PA, ...)
● Redundancy
Master/standby configuration
Status of redundant partners
● Operator stations
● BATCH stations
● Route Control stations
● Archive servers
● SIMATIC PCS 7 BOX
● SIMATIC Industrial PCs
● Standard PCs (also WebNavigator client or WebNavigator
diagnostic client via IP address)
● Redundancy for PC stations from PCS 7
Master/standby configuration
Status of redundant partners
Diagnostics in PCS 7
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents