Download  Print this page

Advertisement

Diagnostics in PCS 7
7.18 Diagnostic tools
Overview
Topic
Diagnosing
hardware
Module
information
Operating mode
Time
Faults on
PROFIBUS
All installed
authorizations
(Versions of
installed
components)
110
Detailed information
Quick view: icons indicate
operating status or module
status.
Use this menu command to
read out information on the
selected module.
Displays the operating mode
of the current module (RUN,
STOP).
This requires an online
connection to the CPU.
Checks/sets time of day
● Faulty bus segment
● Distance of an error
location from the
diagnostics repeater
● Products (name,
version, release)
● Components (name,
version, release)
● Firmware updates
● DLLs (STEP 7‑DLLs,
Windows DLLs)
Called via
PLC > Diagnostics/
Setting > Hardware
Diagnostics
Then, Module
Information > Update:
F5‑key
Select CPU or CP: PLC
> Module information
Select CPU or CP: PLC
> Module information
Select CPU: PLC >
Diagnostics/Setting >
Set Time of Day
Select master system:
PLC > PROFIBUS
Node Diagnostics,
Monitor/Modify Node
Help > About >
"Display" button
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
Additional information
STEP 7 ,
Online help for
topic: "Hardware
diagnostics and
troubleshooting"
You can find information
on this in the section
"Module information
(Page 112)".
Additional information:
Double-click on the icon
STEP 7 ,
Online help for
topic: "Hardware
diagnostics and
troubleshooting"
You can find information
on this in the section
"Module information
(Page 112)".
STEP 7 ,
Online help for
topics "CPU Clocks with
Time Zone Setting and
Summer/Winter Time"
and "Using the Clock
Functions"
STEP 7 ,
Online help for
topic "Topology display
using diagnostics
repeaters"
STEP 7 ,
Online help for
topic "Installed SIMATIC
software"

Advertisement

   Also See for Siemens PCS 7

   Related Manuals for Siemens PCS 7

Comments to this Manuals

Symbols: 0
Latest comments: