Siemens PCS 7 Service Manual page 52

Configuring diagnostics conditions
4.1 Requirements for diagnostics
3. Double-click the "Hardware" object in the detail window.
4. Double-click the module you wish to check.
5. Browse the individual tabs for appropriate options.
SIMATIC modules with diagnostic properties
The following components are available in PCS 7 diagnostic-capable modules:
● S7-400
● S7 300 modules
● ET 200M
● ET 200S
● ET 200iSP
● ET 200pro
● DP slaves
● DP/AS-i link
● Diagnostic repeaters
● Network components (SCALANCE; OSM, ESM)
Additional information
● Online help
52
HW Config opens.
The properties dialog box for the selected module opens.
Activate the diagnostic properties depending on the module type.
Available diagnostic options can be found in the following tabs:
– Diagnostics"
– Inputs"
– Outputs"
– Options"
PC DiagMon
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02