Download  Print this page

Station Configuration Editor - Siemens PCS 7 Service Manual

Hide thumbs

Advertisement

Overview
Topic
Time
synchronization
7.18.2.8

Station Configuration Editor

Calling
Call this on the Windows taskbar by clicking the following icon:
.
Requirement
The components in the configuration list must be entered in the same order as in the component
image you created with HW Config. If the configuration deviates, it cannot be downloaded to
the PC station. You can find additional information on this in the manual
System; PC Configuration and Authorizations , in the section "Preparing the PC stations".
NOTICE
Making changes to the configuration list when the PC station is running causes the entire PC
communication to be closed and restarted.
In this case, you will receive a corresponding warning message.
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
Detailed Information
Synchronization status on
the PC's terminal bus
(requirement: CP 1613)
Called with
Select interface > Click
"Diagnostics" > In the
"Time" group
Diagnostics in PCS 7
7.18 Diagnostic tools
Additional information
Online help for
Microsoft
Management
Console ; see "Set PC
Station" topic
PCS 7 Process Control
95

Advertisement

   Also See for Siemens PCS 7

   Related Manuals for Siemens PCS 7

Comments to this Manuals

Symbols: 0
Latest comments: