Topology Editor (Profinet) - Siemens PCS 7 Service Manual

Diagnostics in PCS 7
7.18 Diagnostic tools
Overview
Topic
General CP
diagnostics and
statistics
functions
Mode-specific
diagnostics
FMS connections DP master diagnostics
PROFIBUS
connections
PROFIBUS
connections
PROFINET
connections
7.18.3.6

Topology Editor (PROFINET)

Calling
Select the PROFINET IO system (e.g. in HW Config) and call the following menu command:
Edit > PROFINET IO > Topology.
Overview
Topic
Devices and
interconnections
Devices and
interconnections
100
Detailed information
Operating mode
Connected stations
Station-related statistics
functions
Station overview
Dynamic information about
the operating mode of the
communication functions of
CPs connected online
Communication status of
slaves and call of data for DP
slave diagnostics
DP slave diagnostics (non-
passive slaves)
DP master
DP slave
FDL connection
FMS connection
Faults and inconsistencies in
FMS connections of the CP
Detailed information
Checking the configured
devices and interconnections
Offline/online comparison
Called via
General" tab
Called via
● "Table view" tab >
"Online" button
● "Graphic view" tab
> "Online" button
● "Offline/online
comparison" tab >
"Start" button
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
Additional information
NCM
● Online help
Diagnostics, Topic
"General diagnostic
functions"
● Manual SIMATIC
NET; NCM S7 for
PROFIBUS
Additional information
Online help for Topology
Editor > "Table view" tab
Online help for Topology
Editor > "Offline/online
comparison" tab