Download  Print this page

Advertisement

Ensuring Availability
3.3 Hardware update
● If only the manufacturer can perform changes to a module, only the product version is
Example:
PS 407 10A
407-0KA01-0AA0
Recommendation for performing firmware updates
Perform these firmware updates at regular intervals when an opportunity presents itself (such
as during a scheduled plant shutdown).
Supply sources for the latest firmware version
You can request the update files for the latest firmware versions from your Siemens contact
partner, or download these from the Internet (http://support.automation.siemens.com). If you
cannot access the Internet address, contact Technical Support.
Note
The update file may be supplied in an executable, self-extracting file (.exe). When you want
to perform consecutive updates for different module types of module versions, you must unzip
the update files in separate folders for the different CPUs as follows:
● Type of module
● Product version
● Firmware version
Overview
The sections below describe topics related to hardware updates:
● Adjustments after a hardware change (Page 35)
● Updating a SIMATIC S7 CPU (Page 35)
● Updating an interface module IM xxx (Page 39)
● Updating a CP xxx (Page 41)
● Working with GSD files (Page 48)
34
shown on the housing of the module (indicated by a cross; in the following example: product
version 10).
X 11
12 13
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02

Advertisement

   Also See for Siemens PCS 7

   Related Manuals for Siemens PCS 7

Comments to this Manuals

Symbols: 0
Latest comments: