Download  Print this page

Diagnostics During Configuration - Siemens PCS 7 Service Manual

Hide thumbs

Advertisement

Diagnostics in PCS 7

7.6 Diagnostics during configuration

Diagnostics for
Connections to the OS: faulty or
established
Status of process interface
Client-server connections
Determine stations
Find IP address and MAC address
Message frames
Collisions
PROFIBUS DP connections
PROFIBUS PA connections
Status of devices which support
SNMP (e.g., network switches)
7.6
Diagnostics during configuration
Overview
Diagnostics for
Consistency of hardware configuration
Consistency of PC station configuration
Block consistency in a SIMATIC station
Chart consistency in a SIMATIC station
Connection error
Open signal interconnections in PCS 7
Operator Station
Connection functions for a PC station
80
Diagnostics tool
Lifebeat Monitoring (Page 101)
Status of connections (Page 105) In the WinCC Explorer: Options > Status of
Status of multi-user operation
(Page 104)
BANY (add-on product)
(Page 117)
PC DiagMonitor (Page 97)
Diagnostics tool
HW Config (Page 111)
Station Configuration Editor
(Page 95)
SIMATIC Manager (Page 109)
SIMATIC Manager (Page 109)
Module Information (Page 112) Select the SIMATIC station in SIMATIC
PCS 7 operator station
(WinCC)
Set PC Station (Page 94)
Called with
Call picture (@CONFIG.PDL) in process mode.
Picture must be configured and downloaded to
the OS.
Connections
In the WinCC Explorer: Options > Status of Multi-
User Operation
If you have installed BANYnet, call the program
with the menu command Start menu > Programs
> BANYnet.
You can find additional information in the section
"Diagnostics on PROFIBUS DP (Page 82)"
You can find additional information in the section
"Diagnostics on PROFIBUS PA (Page 83)".
In the Siemens SIMATIC programs Start menu:
PC DiagMonitor > Management Station
Called with
Menu command Station > Check Consistency
Click the following icon in the taskbar:
Analyze "Status" column table entry
Select SIMATIC Station > S7 Program > Blocks
Menu command Edit > Check Block Consistency
Select SIMATIC Station > S7 Program > Charts
Menu command Edit > Check Consistency
Manager or
the CPU in HW Config.
Convert pictures
In the Siemens SIMATIC programs Start menu:
SIMATIC NET > Settings > Set PC Station
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02

Advertisement

   Also See for Siemens PCS 7

   Related Manuals for Siemens PCS 7

Comments to this Manuals

Symbols: 0
Latest comments: