Ncm S7; Topology Editor (Profinet) - Siemens SIMATIC PCS 7 Service Manual

Diagnostics in PCS 7
8.18 Diagnostic tools
8.18.3.6

NCM S7

Calling
In the Siemens SIMATIC programs Start menu: STEP 7 > NCM S7 > Diagnostics
Overview
Information on
General CP diag‐
nostics and statis‐
tics functions
Mode-specific di‐
agnostics
FMS connections DP master diagnostics
PROFIBUS con‐
nections
PROFIBUS con‐
nections
PROFINET con‐
nections
8.18.3.7

Topology Editor (PROFINET)

Calling
Select the PROFINET IO system (e.g. in HW Config) and call the following menu command:
Edit > PROFINET IO > Topology.
118
Detailed information
Operating mode
Connected stations
Station-related statistics func‐
tions
Station overview
Dynamic information about
the operating mode of the
communication functions of
CPs connected online
Communication status of
slaves and call of data for DP
slave diagnostics
DP slave diagnostics (non-
passive slaves)
DP master
DP slave
FDL connection
FMS connection
Faults and inconsistencies in
FMS connections of the CP
Called via Additional information
General" tab
● Online help
● Manual SIMATIC
Service Support and Diagnostics (V8.2)
Service Manual, 03/2016, A5E36200111-AA
NCM
Diagnostics, Topic
"General diagnostic
functions"
NET; NCM S7 for
PROFIBUS