Digital Operator Keys - YASKAWA CIMR-G7U Technical Manual



Digital Operator Keys

The names and functions of the Digital Operator Keys are described in Table 3.1.
Key
LOCAL/REMOTE Key
MENU Key
ESC Key
JOG Key
FWD/REV Key
Shift/RESET Key
Increment Key
Decrement Key
DATA/ENTER Key
RUN Key
STOP Key
Note Except in diagrams, Keys are referred to using the Key names listed in the above table.
Table 3.1 Key Functions
Name
Switches between operation via the Digital Operator (LOCAL) and
control circuit terminal operation (REMOTE).
This Key can be enabled or disabled by setting user parameter o2-01.
Selects menu items (modes).
Returns to the status before the DATA/ENTER Key was pressed.
Enables jog operation when the Drive is being operated from the Dig-
ital Operator.
Selects the rotation direction of the motor when the Drive is being
operated from the Digital Operator.
Sets the number of digits for user parameter settings.
Also acts as the Reset Key when a fault has occurred.
Selects menu items, sets user parameter numbers, and increments set
values.
Used to move to the next item or data.
Selects menu items, sets user parameter numbers, and decrements set
values.
Used to move to the previous item or data.
Pressed to enter menu items, user parameters, and set values.
Also used to switch from one display to another.
Starts the Drive operation when the Drive is being controlled by the
Digital Operator.
Stops Drive operation.
This Key can be enabled or disabled when operating from the control
circuit terminal by setting user parameter o2-02.
Digital Operator
Function
3
3-