YASKAWA CIMR-G7U Technical Manual page 67

PG-X2
The terminal specifications for the PG-X2 are given in the following table.
Terminal No.
1
2 Power supply for pulse generator
3
4 A-phase + input terminal
5 A-phase - input terminal
TA1
6 B-phase + input terminal
7 B-phase - input terminal
8 Z-phase + input terminal
9 Z-phase - input terminal
10 Common terminal
1 A-phase + output terminal
2 A-phase - output terminal
3 B-phase + output terminal
TA2 4 B-phase - output terminal
5 Z-phase + output terminal
6 Z-phase - output terminal
7 Control circuit common
TA3 (E) Shield connection terminal
* 5 Vdc and 12 Vdc cannot be used at the same time.
Table 2.18 PG-X2 Terminal Specifications
Contents
12 Vdc (±5%), 200 mA max.*
0 Vdc (GND for power supply)
5 Vdc (±5%), 200 mA max.*
Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz
0 Vdc (GND for power supply)
Line driver output (RS-422 level output)
Control circuit GND
Installing and Wiring Option Cards
Specifications
-
35
2-