Digital Operator And H/O/A Control Panel Keys - YASKAWA E7N Technical Manual

Digital Operator and H/O/A Control Panel Keys

The names and functions of the Digital Operator and H/O/A Control Panel Keys are described in Table 3.1.
Key
INCREASE Key
DECREASE Key
SHIFT/RESET Key
DATA/ENTER Key
Drive
Drive Select Key
Select
Bypass
Bypass Select Key
Select
HAND
OFF
AUTO
Drive
Drive Test Key
Test
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 3.1 Digital Operator and H/O/A Control Panel Keys
Name
MENU Key Scrolls from one of the five main menus to the next.
ESCAPE Key Returns to the display before the DATA/ENTER key was pressed.
Increases parameter numbers and set values. Used to move to the next item or data.
Decreases parameter numbers and set values. Used to move to the previous item or
data.
Selects the digit to be changed. The selected digit will blink. Also resets the Drive
when a fault has occurred.
Pressed to enter menus and parameters as well as to set values.
Selects the Drive mode of operation.
Selects the Bypass mode of operation.
Operates the Drive or Bypass via the local control panel. A Run command is
HAND Key
automatic.
OFF Key Removes the Run command.
Enables the Drive or Bypass to be operated by a remote device such as a DDC or
AUTO Key
BAS.
Provides local control of the Drive while the motor is operating in Bypass mode.
Control Panel 3 - 3
Function