* The wire thickness is set for copper wires at 75C.
1
*
Wire size range provided for Drives using insulated screw-type terminal blocks with a single conductor. Refer to applicable codes for proper wire type and size.
2
*
Recommended wire sizes are based on the Drive current ratings and NEC Article 310 Table 310.16, 75 Degree Celsius copper or equivalent.
3
*
Uses non-insulated screw-type terminals. Refer to applicable codes for proper wire type and size.
IMPORTANT
-10
2
Terminal Symbol
,
1, U/T1, V/T2,
200/
200,
400/
400
2
2
L31
U/T1, V/T2, W/T3
,
1
3
200/
200,
400/
400
2
2
L31
U/T1, V/T2, W/T3
,
1
3
200/
200,
400/
400
2
2
L31
U/T1, V/T2, W/T3
,
1
3
200/
200,
400/
400
2
2
Determine the wire size for the main circuit so that line voltage drop is within 2% of the rated voltage. Line
voltage drop is calculated as follows:
Line voltage drop (V) =
3
x wire resistance (/km) x wire length (m) x current (A) x 10
Compact vector control drive.
200 v class, three-phase input: 0.1 to 18.5 kw.
200 v class, single-phase input: 0.1 to 4.0 kw.
400 v class, three-phase input: 0.2 to 18.5 kw (44 pages)
Compact vector control drive.
models: 200 v class, three-phase input: 0.1 to 18.5 kw;
200 v class, single-phase input: 0.1 to 3.7 kw;
400 v class, three-phase input: 0.2 to 18.5 kw (427 pages)
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw. (766 pages)