Figure 57: Network Failure Detection Screen - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide
9.3.4.2 Network Failure Detection
Settings on the Network Failure Detection screen enable the camera to periodically ping another IP
device within the network to detect a network failure, for example, if a video server is disconnected.
By implementing local recording through a microSDXC card, the camera can operate as a backup
recording device for the surveillance system if network communication is lost due to a network
failure.
9.3.4.2.1 Detection Switch
The Administrator can select from the following options:

Select Off to disable an alarm (default setting).

Select On to enable an alarm.

Select By Schedule to set a schedule. Then click Please Select to select up to 10 schedules
from the drop-down list that opens. The selected schedules are displayed in the Please
Select text box. To set a schedule, open the
Click SAVE after configuring the settings.
9.3.4.2.2 Detection Type
In the text box, enter the IP address to ping and the time interval (in minutes) between pings. Click
SAVE after configuring the settings.
56

Figure 57: Network Failure Detection Screen

Schedule tab.