Video Frame Rate; Figure 96: Video Frame Rate Screen - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide

9.4.5 Video Frame Rate

From the Video Frame Rate screen, you can specify the frames per second (fps) for each video
compression format. CB-6204 includes three streams. CB-6208 includes four streams.
MJPEG/H.264 Frame Rate Setting
When operating the unit in H.264-only mode, the default frame is 30 fps in NTSC and 25 fps in PAL.
Note:
A lower frame rate decreases video smoothness.
The following settings apply when operating the unit in any mode other than H.264-only:

MJPEG – The setting range of the MJPEG Frame Rate is from 1 to 60 in NTSC and 1 to 50 in
PAL. The default setting is 30 fps in NTSC and 25 fps in PAL.

H.264-1 – The setting range for the H-264-1 Frame Rate is from 1 to 15 in NTSC and 1 to 12
in PAL. The default setting is 15 fps in NTSC and 12 fps in PAL.

H.264-2 – The setting range for the H-264-2 Frame Rate is from 1 to 15 in NTSC and 1 to 12
in PAL. The default setting is 15 fps in NTSC and 12 fps in PAL.

H.264-3 – The setting range for the H-264-3 Frame Rate is from 1 to 30 in NTSC and 1 to 50
in PAL. The default setting is 15 fps in NTSC and 12 fps in PAL.

H.264-4 (CB-6208 only)– The setting range for the H-264-4 Frame Rate is from 1 to 30 in
NTSC and 1 to 50 in PAL. The default setting is 15 fps in NTSC and 12 fps in PAL.
Click SAVE to confirm the settings.
100

Figure 96: Video Frame Rate Screen