Network Failure Detection; Figure 59: Network Failure Detection Screen - Quasar CM-4251 Series User And Installation Manual

7.3.10 Network Failure Detection

The network failure detection function allows the IP camera to periodically ping another IP device
within the network to detect a network failure, for example, if a video server is disconnected. By
implementing local recording (through a microSD/SDHC card) if a network failure occurs, the camera
can operate as a backup recording device for the surveillance system.
Detection Switch
The Administrator can enable or disable the detection function by selecting On or Off.
By Schedule
To set a schedule:
1. Select By schedule.
2. Click Please Select. A drop-down menu opens.
3. From the drop-down menu, select a schedule from 1 to 10.
For instructions how to set a schedule for network failure detection, refer to Schedule.
Detection Type
In the text box, enter the IP address to ping and the time interval in minutes between pings.

Figure 59: Network Failure Detection Screen

Configuration and Operation
61