Exposure - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide
Every screen in the Camera section includes the following pushbuttons to the left of the Live View
window:
Zoom
Step
Focus
Step
AF

9.5.1 Exposure

The Exposure screen is used to configure lens settings and exposure modes. The exposure is the
amount of light received by the image sensor and is determined by the amount of exposure by the
sensor (shutter speed), and other exposure parameters.
Administrators may either allow the camera to automatically select an exposure level using a
programmed algorithm or choose the level themselves. Even in Auto Mode, a Minimum Shutter
Speed may be set from the drop-down menu to ensure a maximum level of exposure. In Manual
Mode, the administrator can choose fixed shutter speeds from a drop-down menu. The smaller the
104
Click the Wide or Tele Zoom button to implement
continuous zoom adjustment. Click Reset to return the
zoom to the default setting.
Click the Wide or Tele Step button to alternate the
zoom between wide and telephoto views within a
user-defined range of steps, which can be selected
from the drop-down menu.
Click the Near or Far Focus button to implement
continuous focus adjustment. Click Reset to return the
zoom to the default setting.
Click the Near or Far Step button to alternate the
focus between near and far views within a user-
defined range, which can be selected from the drop-
down menu.
Click the Push AF button once to adjust zoom or focus.