Adjusting And Framing-Up The Camera View - Quasar CB-6204 User And Installation Manual

8 Adjusting and Framing-Up the Camera View

After the camera is connected to the network and running, it is necessary to frame-up the scene and
adjust the camera settings to optimize the picture for the individual scenes. If Latitude is being used,
consider scheduling different settings for changing ambient conditions throughout the day, week,
month or seasons.
To adjust and frame-up the camera view
1. In the DNA application, click DNA.
2. In the Discovery list, click to select the camera.
3. Right-click the context menu and select Web, or enter the camera's IP address in your
browser's URL address bar.
4. When the browser connects to the camera and prompts for login, do the following:
a) Log in using the default user name Admin and password 1234. If the password has
previously been changed, use the new password.
b) Allow the ActiveX to download and choose to install the DVTEL Web Player
(DVPlayer).
c) After the unit's web interface opens, use the function buttons on the Home page to
adjust the zoom or focus.
5. To achieve optimum focus results during daytime, open the Camera > Exposure screen in
camera's web interface and select Auto Shutter mode. Save changes and complete the
focusing steps. When finished, restore your exposure settings as needed.
Note:
Both the user name and password are case sensitive.
Tip:
To view greater image detail for more accurate high-definition focusing, on
the web-based Viewer home page, right-click the image, click Full Screen,
and check the focus.
Note:
Best focusing results can be achieved when the lens iris is fully open (such
as at night in low light). This prevents loss of sharpness if light levels are
reduced at night.
Adjusting and Framing-Up the Camera View
25