9.3.7 Schedule
The Schedule screen is used by the network failure detection, tampering and motion detection
functions. To access the schedule function, open the Main window, select the System tab, and click
the Schedule tab. The functions in this tab allow administrators to create customized schedules for
the camera. If a schedule exists, the administrator can apply that schedule to this camera using the
available dropdown. See Figure 74: Schedule Screen.
Note:
This application is not the same as the Recording Schedule function.
To create a new schedule or edit an existing schedule
1. Select the appropriate checkbox for the day(s) of the week (Sun, Mon, Tue, Wed, Thu, Fri
and Sat) to create a schedule.
2. Set Start time (for example, 09:00) and Duration (for example, 4:00 hours).
3. Click SAVE to apply the newly created schedule to the camera.
To remove a schedule
1. To remove a schedule, select the setup data line by line.
2. Click DELETE to remove.
Figure 74: Schedule Screen
Configuration and Operation
75