Figure 49: Mail Screen - Smtp - Quasar CB-6204 User And Installation Manual

Configuration and Operation
9.3.3.6 Mail
Simple Mail Transfer Protocol (SMTP) is a protocol for sending e-mail messages between servers. It is
a relatively simple, text-based protocol, where a text message is transferred to one or more
specified recipients. The Administrator can send an e-mail via Simple Mail Transfer Protocol (SMTP)
when an alarm is triggered. E-mail notifications are set by selecting the checkbox for an e-mail-
related triggered action on the IO, Network Failure Detection, Tampering, Periodic Event, Manual
trigger, and Motion Detection screens.
SMTP (E-mail) server configuration settings are entered in the System > Network > Mail screen:
Figure 49: Mail Screen – SMTP
Two SMTP server accounts can be configured with or without SSL encryption. Enter the settings for
st nd
the 1 SMTP server and 2 SMTP server in the appropriate fields. Settings include SMTP server,
server port (the default port is 25), account name, password, and recipient e-mail address settings.
st nd
To encrypt e-mail with SSL, select the 1 SMTP SSL and/or 2 SMTP SSL checkbox. For SMTP server
details, contact your network service provider. Click SAVE when finished.
9.3.3.7 FTP
The Administrator can send an alarm message to one or two File Transfer Protocol (FTP) sites when
motion is detected. FTP notifications are set by selecting the checkbox for an FTP-related triggered
49