Quasar CB-6204 User And Installation Manual page 75

Quasar CB-6204/CB-6208 User and Installation Guide
 Upload Image by E-Mail – Selecting this option enables you to assign an e-mail address
and configure various parameters, as shown in Figure 56: Upload Image by E-Mail. When
an alarm is triggered, event images will be sent to the designated e-mail address.
Note:
Images can be sent by e-mail only when MJPEG is selected as the video
stream from the
Select one of two e-mail addresses from the drop-down menu. Select the number of
frames for the pre-trigger and post-trigger buffers from the drop-down menu of 1-20
frames.
Note:
Make sure SMTP or FTP configuration has been completed. See the
FTP
9.3.4.5.4 File Name

File Name – Enter a file name in the field, for example image.jpg. The uploaded image's file
name format is set in this section. Select one that meets your requirements.

Add date/time suffix (default setting)
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number

Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number

Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix ends at the number being set. For example, if the setting is up to "10,"
the file name will start from 00, end at 10, and then start over again.

Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static
filename.
Click SAVE after configuring the settings.
62
Video Format
sections for further details.
screen.
Mail and