Audio; Figure 98: Audio Screen - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide

9.4.7 Audio

From the Audio screen you can select the Transmission Mode, Server Gain, Bit Rate, and enable or
disable storage of the audio recording.
Transmission Mode

Full-duplex (Talk and listen simultaneously) – In the Full-duplex mode, the local and remote
sites can communicate with each other simultaneously, i.e. both sites can speak and be
heard at the same time.

Half-duplex (Talk or listen, not at the same time) – In the Half-duplex mode, the local or
remote site can only talk or listen to the other site at one time.

Simplex (Talk only) – In the Talk only Simplex mode, the local/remote site can only talk to the
other site.

Simplex (Listen only) – In the Listen only Simplex mode, the local/remote site can only listen
to the other site.

Disable – Select this option to turn off the audio transmission function.
Server Gain Setting
Set the audio input/output gain levels for sound amplification. The audio gain values are adjustable
from 1 to 6. The sound will be turned off if the audio gain is set to Mute.
Bit Rate
Selectable audio transmission bit rate include 16 kbps (G.726), 24 kbps (G.726), 32 kbps (G.726),
40 kbps (G.726), µLAW (G.711) and ALAW (G.711). Both µLAW and ALAW signify 64 kbps, but in
different compression formats. A higher bit rate enables higher audio quality, but requires higher
bandwidth.
102

Figure 98: Audio Screen