Figure 59: Day/Night Trigger Screen - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide

Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static
filename.
Click SAVE after configuring the settings.
9.3.4.4 Day/Night Trigger
The Day/Night Trigger screen is used to enable the camera to trigger a device connected to the
camera's alarm output when the camera switches to Day or Night mode, which is set on the
Function screen.
In the Day/Night Trigger section, select On to enable the Day/Night Trigger or Off to disable it.
In the Day/Night Type section, select Day when the camera enters Day mode, for example to
deactivate an external device, such as a lighting source. Select Night to activate an external device
when the camera enters Night mode.
In the Triggered Action section, check Enable alarm output to activate an external lighting source.
Depending on the voltage requirements of the external device, from the drop-down menu select
high or low.
60

Figure 59: Day/Night Trigger Screen

IR