Quasar CB-6204 User And Installation Manual page 131

Quasar CB-6204/CB-6208 User and Installation Guide
9.5.4.2 IR LED Illuminator
This setting is used in low-light conditions or at night. IR LED lights are turned On or Off, depending
on the light sensor. The default mode is Auto. Two settings are available:

Auto – The light sensor operates automatically.

Off – The IR light is always off.
Click SET to confirm the new setting.
9.5.4.3 Day/Night Threshold
Set the threshold at which you want to activate the IR function:

For the daytime to nighttime threshold, from the upper drop-down list, select a number
between 1-9, where 1 is darker and 9 is brighter.

For the nighttime to daytime threshold, from the upper drop-down list, select a number
between 1-9, where 1 is darker and 9 is brighter.
Click SET to confirm the new setting.
9.5.4.4 IR Compensation
From the drop-down list, set the IR Compensation to On or Off. Setting IR Compensation to On
compensates for the reflection of infrared light emitted from the camera onto reflective objects,
thus improving image sharpness and definition. Without IR compensation, objects may appear
blurred.
Click SET to confirm the new setting.
118