Figure 104: Advanced Picture Settings Screen - Backlight - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide
Four white balance modes are available:

Auto – The Auto Balance White mode computes the white balance value output using color
information from the entire screen. It is suitable for an environment with a light source color
temperature in the range of approximately 2,700 ~ 7,500K.

ATW (Auto Tracking White Balance) – The Auto Tracking White Balance function
automatically adjusts the white balance in a scene while temperature color is changing. The
ATW Mode is suitable for an environment with a light source color temperature in the range
of approximately 2500 ~ 10,000K.

One Push – This button activates the factory-optimized setting for white balance. This setting
may not be ideal for every lighting environment.

Manual – In this mode, you can manually change the white balance value. You can select a
number between 0 – 127 for either/both Rgain and Bgain to increase the red and/or blue
luminance.
Click SET to confirm the new settings.
9.5.3.2 Backlight
The Backlight Compensation function prevents the center object from being too dark in
surroundings where excessive light is behind the center object. Select On or Off.
Click SET to confirm the new settings.
114
Figure 104: Advanced Picture Settings Screen – Backlight