Network Failure Detection - Quasar CP-3211 User And Installation Manual

Quasar CP-3211/CP-4221 User and Installation Guide

Send HTTP notification – Check this box to send a notification by HTTP. Select the destination
HTTP address from the drop-down menu and specify the parameters for event notifications
by motion detection triggered. When an alarm is triggered, the notification will be sent to
one of two specified HTTP servers. See figure below.
Note:
Make sure that local recording (with a microSD/SDHC card) is activated so that
this function can be implemented. See
File Name
The uploaded image's filename format is set in this section. Select one that meets your
requirements.
Save
Click the Save button to save the motion detection settings.

7.3.10 Network Failure Detection

The network failure detection function allows the IP camera to periodically ping another IP device
within the network to detect a network failure, for example, if a video server is disconnected. By
implementing local recording (through a microSD/SDHC card) if a network failure occurs, the camera
can operate as a backup recording device for the surveillance system.
Detection Switch
The Administrator can enable or disable the detection function by selecting On or Off, or select By
schedule to set a schedule.
80
Figure 64: Send HTTP Notification Option
Figure 65: Network Failure Detection Screen
Recording for further details.