Figure 60: Periodic Event Screen - Quasar CB-6204 User And Installation Manual

9.3.4.5 Periodic Event
The Periodic Event screen is used to specify an alarm to be triggered at a specified time interval.
9.3.4.5.1 Periodic Event
Select Off or On to activate this function. The default is Off.
9.3.4.5.2 Time Interval
In the Minimum interval text box, enter the number of seconds for the minimum interval between
alarms. The range is from 20 to 3600 seconds.
9.3.4.5.3 Triggered Action
The Administrator can specify multiple alarm actions to be taken when a triggering event occurs. The
options are listed as follows:
 Upload Image by FTP – Selecting this option enables you to assign an FTP site and
configure various parameters, as seen in Figure 53: Upload Image by FTP. When the
alarm is triggered, event images will be uploaded to the designated FTP site.
Note:
Images can be sent by FTP only when MJPEG is selected as the video stream
from the
 Specify the FTP address to use from the drop-down menu. Select the number of frames
for the pre-trigger and post-trigger buffers from the drop-down menu of 1-20 frames.

Figure 60: Periodic Event Screen

Video Format screen.
Configuration and Operation
61