Quasar CB-6204 User And Installation Manual page 68

In the Image Frequency text box, from the drop-down list select the number of frames
per seconds from 1-15 for the upload.
Click SAVE after configuring the settings.
9.3.4.1.5 File Name

File Name – Enter a file name in the field, for example image.jpg. The uploaded image's file
name format is set in this section. Select one that meets your requirements.

Add date/time suffix (default setting)
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number

Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number

Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix ends at the number being set. For example, if the setting is up to "10,"
the file name will start from 00, end at 10, and then start over again.

Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static
filename.
Click SAVE after configuring the settings.
Note:
Make sure that SMTP configuration has been completed. See
Configuration and Operation
Mail for details.
55