Figure 83: Software Upgrade - In Process - Quasar CB-6204 User And Installation Manual

Note:
Make sure that the software upgrade file is available before performing a software
upgrade.
To upgrade the software
1. In the Step 1 text box, click Browse and select the binary file to be uploaded, for example,
uImage+userland.img.
Note:
Do not change the file name. If you change the upgrade file name, the system
will fail to find the file.
2. From the drop-down menu of binary files in Step 2, select the file to upgrade. In the above
example uImage+userland.img is selected.
3. Click UPGRADE. The system verifies that the upgrade file exists and begins to upload the file.
The upgrade status bar is displayed on the page. When the upgrade process is completed,
the Live page is displayed.
4. Close the video browser.
5. From the Windows Start menu, select Control Panel.
6. Select Uninstall a Program.
7. In the Currently installed programs list, select DVPlayer.
8. Click Uninstall to delete the existing DVPlayer.
9. Install the new DVPlayer ActiveX plug-in.
Warning:
Do not unplug power while upgrading the software.
Avertissement:
Ne débranchez pas l'alimentation pendant la mise à niveau du logiciel.
Figure 83: Software Upgrade – In Process
Configuration and Operation
83