9.3.3.4 UPnP
The System > Network > UPnP screen enables the Universal Plug-and-Play protocol on your network
devices.
UPnP Settings
Enable UPnP – If UPnP is enabled and a camera is discovered on the LAN, the icon of the
connected camera appears in My Network Places, allowing direct access, as seen below.
Note:
To enable this function, make sure the UPnP component is installed on your
computer. Refer to
Windows 8.1 procedure.
Figure 46: UPnP Screen
Figure 47: Direct Access to Camera with UPnP Enabled
Install UPnP Components
Configuration and Operation
for the Windows 7, Windows 8, and
47