Figure 66: Video File Recording List - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide
Device Information
Upon connecting to the NAS, the following information about the disk is displayed:

Device type – Displays Network Share

Free space – Displays the amount of available storage space in GB

Total size – Displays the total amount of storage space in GB

Status – Indicates if the camera is online or offline

Full – Indicates if the disk is full (Yes/No)

Protocol – Displays the protocol used by the NAS. The default is SAMBA.
Enter the details for the following fields:

Host – Enter the host IP address

Share – Enter the path for a shared network storage device

User name – Enter the name of the user accessing the NAS

Password – Enter the password of the user accessing the NAS
Storage Tools
Click FORMAT to format the NAS.
Disk Cleanup Setting
Enable automatic recording cleanup by selecting Enable automatic disk cleanup. From the pull-down
menu, specify the minimum length of time over which to remove recordings. For example, remove
recordings over 10 days old. Enter the percent of disk capacity used in order to remove the oldest
recordings. Click SAVE when finished.
Recording List
Each video file stored on the NAS is listed in the Recording list. See
When the recording mode in the Recording screen is set as Always (consecutive recording) and the
NAS recording is enabled by events triggered, the system immediately saves a recorded event on the
network disk once an event occurs. Then the camera will return to the regular recording mode after
events recording.

Remove – To remove a file, first select the file and then click REMOVE.

Sort – Click SORT to list the files in the Recording list in order of name and date.
68

Figure 66: Video File Recording List

Recording for further details.