Quasar CB-6204/CB-6208 User and Installation Guide
9.3.4 Events Setup
The Events Setup tab includes the following screens:
IO
Network
Failure
Detection
9.3.4.1 IO
The IO screen is used to control input and output alarms and messages, which are generated when
an event is recognized by the system.
9.3.4.1.1 Alarm Switch
The Administrator can select from the following options:
Select Off to disable an alarm.
Select On to enable an alarm (default setting).
Select By Schedule to set a schedule. Then click Please Select to select up to 10 schedules
from the drop-down list that opens. The selected schedules are displayed in the Please
Select text box. To set a schedule, open the
Click SAVE after configuring the settings.
52
Tampering
Day/Night Trigger
Figure 52: IO Screen
Schedule
Periodic Event
tab.
Manual Trigger