Mounting Instructions; Eliminating Ir Reflection; Figure 15: Dna Assign Ip Dialog Box - Quasar CB-6204 User And Installation Manual

g. Disconnect the Ethernet cable. The camera is ready for deployment (mounting) in a
site installation.

5.5 Mounting Instructions

The camera can be installed directly on a wall or ceiling with the integrated three-axis adjustable
bracket mount.
Note:
The wall or ceiling must have enough strength to support the camera.

5.5.1 Eliminating IR Reflection

To eliminate IR reflection
1. Clean the protective lens cover on the camera housing from dirt and finger prints.
2. Make sure the lens cover has no scratches.
3. Avoid aiming the IR where there are nearby objects closer than the scene of interest which
might reflect back into the lens.

Figure 15: DNA Assign IP Dialog Box

Note:
1. The camera can be connected to a PC for bench installation via an
Ethernet cross-cable.
2. The camera default IP Address is automatically set by the DHCP
server. If using Latitude, the Address must be set manually.
Tip:
A camera setup adapter, such as Veracity Pinpoint, can be used to
connect a laptop directly to the camera when using PoE.
Installation
15