Network; Figure 43: Network > Basic Screen - Quasar CB-6204 User And Installation Manual

Quasar CB-6204/CB-6208 User and Installation Guide

9.3.3 Network

From the System screen, click the Network tab.
The following screens are available from the Network tab:
 
Basic QoS
9.3.3.1 Basic
The Basic screen is used to configure the camera's basic network settings.
It is possible to connect to the camera with either fixed or dynamic (DHCP) IP address. The camera
also provides PPPoE (Point-to-Point Protocol over Ethernet) support for users who connect to the
network via PPPoE.
The Basic screen is divided into three sections: General, Advanced and IPv6 Configuration.
1. General
Select one of the following options in the General area for configuring network settings:

Get IP address automatically

Use fixed IP address

User PPoE
42
 
SNMP UPnP
Figure 43: Network > Basic Screen
 
DDNS Mail
 
FTP HTTP