There Are Black Traces On The Document - Fujitsu Libra S6 Operator's Manual

Chapter 7 Troubleshooting

There are black traces on the document.

Are you scanning documents written in lead pencil or
carbon paper?
No
Are the glass sections and rollers inside the ADF clean?
Yes
When you scan documents written in lead pencil, make sure to clean the rollers
frequently. Otherwise, the rollers will be contaminated which may leave black
Yes
traces on the document or cause feeding errors.
For details, refer to "Chapter 5 Daily Care" (page
Clean the parts that are not clean.
For details, refer to "Chapter 5 Daily Care" (page
No
If the problem persists, check the items in
Service Provider" (page 85)
authorized FUJITSU scanner service provider.
49).
49).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
84