How To Change The Ozone Filter - Ricoh FT2012 Operating Instructions Manual

How To Change The Ozone Filter

While you change the ozone filter, be careful not to stain your hands with
carbon. (Try not to touch filter surface.)
1
Move the tab in the direction
of the arrow while pulling the
tape edge — the used filter
should come out.
..........................................................
2
Unpack the new ozone filter.
While pulling the tab in the di-
rection of the arrow, push the
new filter in the holder with
the tape side of the filter on
the bottom.
..........................................................
3
Close the top unit with both
hands.
After you close the top unit, the
copier operates for about 1 min-
ute. After the copier stops, make
sure that the "iu" is not displayed
on the copy counter.
Do not turn off the main switch
until the copier finishes resetting
itself (after about 1 m inute).
CHANGING THE IMAGING UNIT
39