How To Change The Ozone Filter - Ricoh FT2012+ Operating Instructions Manual

CHANGING THE IMAGING UNIT

How To Change The Ozone Filter

While you change the ozone filter, be careful not to stain your hands with
carbon.
1
Move the lever in the direction
of the arrow while pulling the
tape edge — the used filter
should come out.
2
Unpack the new ozone filter.
While pulling the lever in the
direction of the arrow, push the
new filter in the holder with the
tape side of the filter is the bot-
tom.
3
Close the top unit with both
hands.
After you close the top unit, the
copier moves for about 1 minute.
After the copier stops, make sure
that the "iu" is not displayed on the
copy counter.
Do not turn off the main switch un-
til the copier finishes checking itself
(after about 1 minute).
38