User Details Setup; Maximum Login Attempts - Xerox Versant 2100 Press System Administration Manual

Authentication/Security Settings
6. Select Reset.
A screen is displayed and prompts Reset or Cancel the reset? Carefully review the
displayed information before performing a reset. It is important to remember that
once you accept a reset, that information cannot be restored.
7. Select Reset or Cancel.
Selecting Reset displays a confirmation screen asking if you are sure? Select Yes to
delete or reset as applicable to the Reset User Accounts option selected.
8. Select Close.
The main Tools tab screen displays.
9. Exit the administrator mode.

User Details Setup

This feature allows you to configure the settings for user ID authentication. The available
settings depend on the authentication type selected at Tools > Authentication/Security
Settings > Authentication > Login Type.
1. Log in as the administrator.
2. Press the Tools button on the press Control Panel.
3. Select the Tools icon on the screen.
4. Select AuthenticationSecuritySettings > Authentication.
5. Select User Details Setup.
The options that display depend on the type of authentication that is enforced;
available options depend on the Login Type selected.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select Save.
9. Select Close.

Maximum Login Attempts

You can set the number of attempts a person is allowed to enter the same system
administrator's login ID after which access to the system is disabled. Set the number of
authentication attempts allowed between 1-10.
Note
The count is reset when the press is restarted. To cancel the access rejection, shut down
the press by switching off the power and switching it on again.
1. Log in as the administrator.
2. Press the Tools button on the Control Panel.
3. Select the Tools icon on the screen.
4. Select Authentication/Security Settings > Authentication.
5. Select Maximum Login Attempts.
6. Select either:
8-8 Xerox ® Versant 2100 Press
System Administration Guide