3.
Use the numeric keypad on the control panel or the keyboard
displayed on the screen to enter the system administrator's
password of 4 to 12 characters.
4.
Press [Save].
5.
Press [Re-enter Password].
6.
Press [Keyboard].
7.
Re-enter the same system administrator's password of 4 to 12 characters by using the numeric keypad on
the control panel or the keyboard displayed on the screen.
8.
Press [Save].
5.6.3
Maximum Login Attempts
This feature allows you to prevent unauthorized users from impersonating the administrator to change the machine
configuration. You can specify the maximum number of fails allowed so that access will be denied when the number
of consecutive attempts to log in as system administrator exceeds this limit.
This limit can be set to a value between 0 and 10 times.
The factory default is [5] times.
Rebooting the machine will reset the failure count.
Note
To exit the Access Denied state, reboot the machine.
Steps
1.
Press [Maximum Login Attempts].
2.
Press [Yes].
3.
Enter the number of the upper limit by using the numeric
keypad or by pressing [
4.
Press [Save].
] and [
].
5.6 System Admin Settings
5
125