5. FIRMWARE VERSION UP
5.2
USB ISW
5.2.1
Outline
Conduct the ISW locally by connecting the USB memory to the USB port of the main body.
5.2.2
SPECIFICATIONS
A. Parts required to conduct the USB ISW
•
USB memory: 1 pcs
Note
• Create the bizhub501, bizhub421, bizhub361 or LoadableDeviceDriverROM folder directly under
the USB memory route.
• When copying the firmware to the memory, be sure to copy ".bin" file and ".sum" file or ".drv" file
and ".sum" file at the same time.
• Be sure to copy the files of each firmware to the USB memory in the configuration of the folders
shown in the below.
• If the copying is not completed correctly, a message "The data is not found" is displayed on the
panel when the ISW files are selected.
bizhub501
MFP_controller
Operation_message
Image_controller
Df_controller
Finisher_controller
Fax_controller
LoadableDeviceDriverROM
102
bizhub421
MFP_controller
Operation_message
Image_controller
Df_controller
Finisher_controller
Fax_controller
LoadableDeviceDriverROM
Field Service Ver.2.0 Mar. 2009
bizhub361
MFP_controller
Operation_message
Image_controller
Df_controller
Finisher_controller
Fax_controller
LoadableDeviceDriverROM