Konica Minolta BIZHUB 501 Service Manual page 190

Field Service Ver.2.0 Mar. 2009
[1]
B. Procedure for reinstallation
[8]
[10]
[1] [2]
[9]
[7]
[2]
[3]
a0r5f2c017ca
[6]
[4] [5]
a0r5f2c018ca
7.
Reverse the exposure unit [1] and remove the
connector [2].
8.
Remove the screw [3] and remove the exposure
unit.
1.
Move the V-mirror unit [1] to the vicinity of the V-
mirror positioning hole [2].
2.
Insert the optics unit positioning jig [3] into the V-
mirror positioning hole and fix the V-mirror unit.
Note
• Be sure to insert the optics unit positioning jig
from the front side and pass it through the V-
mirror unit.
3.
Insert the optics unit positioning jig [5] into the
exposure unit positioning hole [4].
4.
Hit the exposure unit [6] against the optics unit
positioning jig [5].
5.
Install the exposure unit to the exposure unit
mounting plates /Fr [7] and /Rr [8] with the screws
[9] and [10].
6.
Pull off the 2 optics unit positioning jigs.
7.
For the parts to be installed in the succeeding
steps, be sure install them following the removal
steps in reverse.
6. OTHERS
153