Konica Minolta BIZHUB 501 Service Manual page 370

Field Service Ver.2.0 Mar. 2009
Classification Jam code
DF J-6308
J-6501
J-6502
J-6503
J-6504
J-6505
J-6506
J-6507
J-6508
J-6509
J-6510
J-6511
J-6512
J-6513
Cause
When feeding the third original in the
mode other than the single sided
mode, the original detection sensor
(PS8) does not turn OFF within a
specified period of time after the PS8
turns ON.
While in the idle, the original feed sen-
sor (PS6) is ON.
While in the idle, the original registra-
tion sensor (PS9) is ON.
While in the idle, the original feed sen-
sor (PS6) or the original registration
sensor (PS9) is ON.
While in the idle, the original exit sen-
sor (PS10) is ON.
While in the idle, the original registra-
tion sensor (PS6) or the original exit
sensor (PS10) is ON.
While in the idle, the original registra-
tion sensor (PS9) or the original exit
sensor (PS10) is ON.
While in the idle, any of the original
feed sensor (PS6), the original regis-
tration sensor (PS9) or the original exit
sensor (PS10) is ON.
While in the idle, the original detection
sensor (PS8) is ON.
While in the idle, the original registra-
tion sensor (PS6) or the original
detection sensor (PS8) is ON.
While in the idle, the original registra-
tion sensor (PS9) or the original
detection sensor (PS8) is ON.
While in the idle, any of the original
feed sensor (PS6), the original regis-
tration sensor (PS9) or the original
detection sensor (PS8) is ON.
While in the idle, the original detection
sensor (PS8) or the original exit sen-
sor (PS10) is ON.
While in the idle, any of the original
feed sensor (PS6), the original detec-
tion sensor (PS8) or the original exit
sensor (PS10) is ON.
Resulting Correction
operation
The DF stops Open the open/close
immediately. If cover and remove
there is paper jammed paper if any.
being trans-
ferred or having
been trans-
ferred, the main
body completes
the paper exit
before stopping
operations.
12. JAM CODE
333