Disassembling And Assembling Procedure; Removal And Reinstallation Of The Right Cover, The Front Cover And The Rear Cover - Konica Minolta BIZHUB 501 Service Manual

Field Service Ver.1.0 May. 2008
3.2

Disassembling and assembling procedure

Caution
• When connected to the main body, make sure that the power cord of the main body is unplugged
from the power outlet.
3.2.1

Removal and reinstallation of the right cover, the front cover and the rear cover

A. Procedure
[1] [2]
[3]
[4]
16aaf2c014na
1.
Pull out LU from the main body side.
2.
Open the upper door [1].
3. Remove the 2 screws [2] and then remove the
right cover [3].
Note
• When installing the right cover [3], be sure to
take note of the direction of the 2 casters [4].
3. OTHERS
13