Hdd Format; Upgrading Of The Firmware; Software Used In The Machine - Konica Minolta bizhub C3110 User Manual

1.5 Miscellaneous

HDD Format

Execute HDD format when, for example, to initialize the HDD (to be reset to the default state) or when the
HDD is replaced with a referent one. Executing HDD format deletes data saved in the machine's HDD.
- For details of items that are cleared by HDD Format, see page 1-11.
- HDD formatting turns [OFF] the Enhanced Security Mode. So, it must be turned [ON] again. For details
of settings, see page 2-5.

Upgrading of the firmware

If upgrading of the firmware has been performed by the service engineer, the Administrator of the machine
must execute [RESTORE ALL]. Execute [RESTORE ALL] after the firmware has been upgraded. For details of
the execution of [RESTORE ALL], see page 2-20.
- For details of items of data to be cleared by [RESTORE ALL], see page 1-11.
- The execution of [RESTORE ALL] will turn [OFF] the Enhanced Security Mode. So, it must be turned
[ON] again. For details of settings, see page 2-5.

Software used in the machine

The following lists the types of software and their versions used for the ISO15408 evaluation for this machine.
The user should appropriately manage the software used with the machine on his or her own responsibility.
Software
OS (Operating System)
Internet Explorer
Mozilla Firefox
Printer Driver
PageScope Data Administrator
with Device Set-Up and Utilities
PageScope Data Administrator
(plug-in)
TWAIN Driver
IC card reader driver
bizhub C3110
Version, etc.
Windows 7 Professional SP1
Ver. 10
Ver. 27.0.1
KONICA MINOLTA C3110
• PCL6 Ver. 1.0.0.0
• XPS Ver. 1.0.1.0
Ver. 1.0.06000.03221
Ver. 4.1.25000.12271
Ver. 1.0.1.0
AU-201_V2.1.02000 (for AU-201)
AU-201H_V2.1.00000 (for AU-201H)
1
1-12