Konica Minolta BIZHUB 501 Service Manual page 130

Field Service Ver.2.0 Mar. 2009
[2] [3]
[1]
14.
Note
[3] [2]
15.
50gaf2c102na
Remove the 2 fusing bearings /Lw [2] from the
fusing pressure roller [1].
• When installing the fusing bearing /Lw, be
sure to install it with its collar section [3]
inside. Coat the cored bar section with
grease.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
93