Replacing The Feed Roller/Pick-Up Roller (Tray 2) - Konica Minolta BIZHUB 501 Service Manual

Field Service Ver.2.0 Mar. 2009
3.11.3

Replacing the feed roller/pick-up roller (tray 2)

A. Periodically replaced parts/cycle
• Feed roller
• Pick-up roller
*1 501/421
*2 361
B. Procedure
[4]
[1]
: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
[1]
50gaf2c120na
[3]
[2]
50gaf2c121na
1.
Remove the bypass unit.
(See P.62)
2.
Pull out the tray 2 [1].
3.
Push the lever [1] to open the vertical conveyance
door [2].
4.
Detach the fulcrum [3] of the vertical conveyance
door from the mounting plate [4] and remove the
vertical conveyance door.
3. PERIODIC CHECK
53