Konica Minolta BIZHUB 501 Service Manual page 368

Field Service Ver.2.0 Mar. 2009
Classification Jam code
DF J-6108
J-6201
J-6202
J-6203
J-6204
J-6205
J-6206
J-6207
Cause
When feeding the third original in the
mode other than the single sided
mode, the original feed sensor (PS6)
does not turn OFF within a specified
period of time after the PS6 turns ON.
While in the single sided mode, the
original registration sensor (PS9) does
not turn ON within a specified period
of time after the feed motor (M1) turns
ON.
When feeding the first original in the
mode other than the single sided
mode, the original registration feed
sensor (PS9) does not turn ON within
a specified period of time after the
feed motor (M1) turns ON.
When feeding the second original in
the mode other than the single sided
mode, the original registration sensor
(PS9) does not turn ON within a spec-
ified period of time after the feed
motor (M1) turns ON.
When feeding the third original in the
mode other than the single sided
mode, the original registration sensor
(PS9) does not turn ON within a spec-
ified period of time after the feed
motor (M1) turns ON.
While in the single sided mode, the
original registration sensor (PS9) does
not turn OFF within a specified period
of time after the PS9 turns ON.
When feeding the first original in the
mode other than the single sided
mode, the original registration sensor
(PS9) does not turn OFF within a
specified period of time after the PS9
turns ON.
When feeding the second original in
the mode other than the single sided
mode, the original registration sensor
(PS9) does not turn OFF within a
specified period of time after the PS9
turns ON.
Resulting Correction
operation
The DF stops Open the open/close
immediately. If cover and remove
there is paper jammed paper if any.
being trans-
ferred or having
been trans-
ferred, the main
body completes
the paper exit
before stopping
operations.
12. JAM CODE
331